VST plugin (linux/windows 32/64bit) to control/sequence your Electribe ESX/EMX using a DAW. DISCLAIMER: the EMX-scripts are not finished/available yet, since I dont own one. However, looking at the manual, anyone with a text-editor could modify the ESX scripts to get it working. (please send me those to info at leondustar dot com) demonstration @ http://www.youtube.com/watch?v=XFIJuEtbHH0 REQUIREMENTS ============= * not afraid of midi * a midiconnection (usb-2-midi-cable e.g.) from your computer (midi out) to your electribe esx (midi in) * you need a VSTHOST which supports midivst. 1) download the zip (and unzip it into your vstfolder if you want to use it with your DAW) 2) run an .exe file in windows. In linux run the '-linux'-files from the commandline. Or, start your VSTHOST, and launch the plugin (its called 'reaJS' or 'electribe-vstx-32/64') 3) the plugin pops up with the default program for electribe track 2 (press the 'Load' button to select other electribe parts) 4) make sure the plugin is outputting to your midicable (which is connected to your esx/emx) 5) have fun controlling/sequencing those sliders!
tool nprn vst midi controller daw emx esx
Open Electribe Editor (formerly known as ESX Wave Organizer) is a program that allows you to organize, edit, and create .esx files for the Korg ESX-1. It is actively being developed, and is available for download on Windows, Linux, and Mac. Must have for every Korg Electribe ESX owner.
Just another fun little monome emulator type thing. I was getting curious about how much better a monome 128 would be. Using the MIDI keyboard on the Korg Electribe you can get 16 columns horizontally, and 9 rows vertically using the drum parts (ESX) or 5 rows from the keyboard parts (EMX). Instructions (Korg ESX) Select Keyboard Part 1 and make sure the octave setting is on the lowest setting: Select the MIDI device that the Electribe is connected to. Set the row by choosing a drum part. Remember that afterwards you will have to reselect Keyboard Part 1. Play! Instructions (Korg EMX) Press one of the keyboard parts (1-5) to select a row. Make sure it’s on the lowest octave setting (see above) Play! Note: You don’t need anything else running (monomeserial etc). It also makes sense not to have the volume on! contact author @ http://ewanhemingway.co.uk/blog/electribome/
Electribe2 Pattern Editor version 026 The Electribe2 Pattern Editor can be used to bring patches (parts) and sequences of various Electribe2 patterns together in new patterns. Editing of sequences is also possible. You can use your Electribe2 now for turning the dials. A Launchpad (original, S or mini) can be used to edit the sequence. Version 026: - MIDI support for Electribe2 dials - MIDI support for Novation Launchpad for the sequencer - View selector: Parameters, Sequence or Wide - Open- and Save Dialogs - Layout changes - Bugfixes Version 018: - Number display for Gate Time and Velocity edit Version 016: - Added a Windows stand alone version for MAX 6 (runtime) Version 015: - Added editor for sequences - Added grid for 8 drum parts Version 012: - Added editing of the Part Parameters. Version 011: - Added editing of the Global Parameters. Version 010: - First release. Loading and saving of .E2PAT files works, loading and saving of parts and sequences is also possible. This is the minimum functionality to let this editor work as a librarian. Next step: - MIDI IO to Electribe2 The working is simple. First you have to drop an E2Pat file (exported from the electribe2). You can select a current part by clicking on it's name. Then it is possible to save the current part or the current sequence or a combination of them to disc. This way you can create a library of patches (parts) and sequences. To create a new pattern you have to load an .E2PAT file as a starter. Then you can Select parts and drop parts and sequences from you library. Then you save the new .E2PAT fale and import is into you Electribe2. Of course the Electribe2 Pattern Editor is freeware. All sources are included. Please feel free to comment on this and make suggestions for improvement. Electribe forum: http://www.korgforums.com/forum/phpBB2/viewforum.php?f=48
e2 tool ableton editor pattern
from the site: hack which expands your traditional hardware/software samplers using many-samples-in-one-sample (poor man's soundfont) This is a directorybased sample-utility which can glue samplefiles together into one samplefile. This file can be used in old/new hardware/software samplers. This only works well if your sampler supports setting the samplestart-offset-parameter on-the-fly. For example, the startposition-knob on your sampler goes from 0..127. In theory this means you can navigate thru 128 samples if you generate a sample which contains 128 samples (with the same length..hence the trim-feature). In these days fiddling with hardware samplers can be cumbersome..swapping disks, copying stuff etc. With this tool you can just 'bake' a subset of your sample collection/directories to one file, and access them all at once on your sampler.
tool multishot generator esx samplepadding
2 Promosing Standalone Windows applications 'KONG ESXY PITCH' and 'KONG ESXY BEAST'. Still in beta, read the included pdf for details. Please send feedback to primate_terra at hotmail.com or Simio Barcino on facebook.
SMARTNAMER FOR THE KORG ELECTRIBE ES-1 The Korg Electribe ES-1 is a sampler/step-sequencer with build in effects. The ES-1 uses SmartMedia(tm) for saving and loading memory and loading samples. But the ES-1 only recognises samples wich are named 00.wav to 99.wav. Renaming these samples for you: that's the main task of the 'Electribe ES-1 - SmartNamer'. Korg Electribe ES1 - SmartNamer 0.8 beta (C) Burpproductions 2001-2004, by Jan den Besten. First: Using this program is at your own risk! Although everything is done to make the 'SmartNamer' a safe tool to use, the author and copyright holder are not responsible for any damage or harm done by the 'SmartNamer'. Introduction The 'Korg Electribe ES-1 Rhythm Production Sampler' uses SmartMedia cards to store memory-dumps and/or samples. This way you can store them into your computer or use samples made on your computer. The ES-1 however only recognises samples named 00.wav till 99.wav (or .aif but only the .wav format is used by the 'SmartNamer'). The core task of the 'SmartNamer' is to rename the samples, and to remember the original names. But it has more features for easy file exchange. Features - Copying samples from your PC to SmartMedia while renaming them to 00.wav till 99.wav which the ES-1 recognises. - Remembering the original sample names. (In the 'names.txt' file on SmartMedia). - Copying and naming bank files (.es1) the same way as samples. - Renaming and deleting samples and bankfiles. - Audition samples when they are doubleclicked. Distribution You may distribute this program freely as the original .zip file. You can use this program for free and if you like it and want to express your thanks, just contact the author, maybe he likes to have a cd with your music... Download es1org08.zip You need the Visual Basic 6 Runtime files which you can find at several download sites and at microsoft. Installation Just unzip the file and start setup.exe
tool es1 smartmedia smartnamer
Electribe Pad is a kind of notebook for Electribes EA1 and ER1. Midi you can edit on your PC, change the values of the controllers, save and load button values. use various preset settings buttons, and play ElecTribe from your computer keyboard ! Electribe pad acts like a notepad for the Korg Electribe EA-1 and ER-1. With MIDI, you can edit em remotely, track knob exchange, save / load settings knobs, knobs random settings and play 'em with the computer keyboard. Installation - unzip "electribepad.zip" file - copy all the files in a directory and run "electribes.exe" - configure your MIDI input and output you have connected to your Electribes! Installation - unzip "electribepad.zip" - copy all the files into one directory and run electribes.exe - setup your MIDI input and output connected to the Electribes To Contact the creator of this Software norsez@yahoo.com
tool ea1 er1 electribe editor software
automatic slicer for linux (bash) users. This is not for the fainthearted, please refer to an traditional waveeditor instead.
Popular software sampler (100% free) to use in conjunction with the Electribe ESX/EMX. It delivers an easy way to extend your electribe with sfz/sf2 soundfonts and complex samplemapping/resampling on keyboardparts. It's touted as the best hybrid workflow between hardware- and software. Requirements: a pc, electribe midi output to usb-to-midicable, (for esx: audio out of pc routed to elecrtibe audio-in). Recommended usage with free herman seibb's vsthost/savihot. For more instructions see this article: http://leondustar.nl/blog/archive/hybrid-setup From the site: "Tired of the same old sample playback plug-ins, rehashing tired preset sounds and locking you in to a single manufacturer and data format? Would you like to experience that sheer joy that comes from building your own sounds, recording your own samples and mangling them with near endless sound shaping possibilities?"
tool sampler vst electribe extension
